How do I use Boot and Nuke? (11/08/04)
1. Go to http://dban.sourceforge.net/ .
2. Go to the download Section of the website, and download the "Floppy Version" of the Boot and Nuke software.
3. Extract the files in the zip file.
4. Insert a blank, formatted diskette into the "A" drive
5. In the specified path that the files were extracted, double click on "install.bat" or "install".
6. Install takes about a minute.
7. To make more Boot and Nuke diskettes, repeat steps 1-6.

How do I use"Boot and Nuke"? (11/08/04)
1. Make sure that the floppy drive is the first thing that boots (setup in the BIOS)
2. To use the bootable diskette, just insert the diskette into the floppy drive before turning it on and while it is in the off position.
3. Further instructions would be available after the disk loads. Note: the more passes that are run, the longer the process will take.

How does a site secure networks in an "Open Enviornment"? (10/20/04)
a: A network can always be secure with a firewall, but to protect a computer, a person can use a program called "Deep Freeze" and antivirus software. A recommended antivirus software would be eTrust. With eTrust, simply request a demo disk.